PC5500-6

> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?

  Print Brochure (1,380 Kb)

Click for Larger Image

< Page 1 2 >  
Diesel Drive   
The integrated engine oil & filter system combining the oil stabilizing systems, Reserve and Centinel, with the Eliminator self cleaning oil filter extends, with oil analysis, the oil change interval to 4000 hours. (not available in Australia) 
Model    2 x Komatsu SDA12V159E-2 
Type    4-cycle, water-cooled, direct injection 
Aspiration    Turbocharged and aftercooled 
Number of cylinders    12 
Rated power @ 1800 rpm
(SAE 1995/J1349) 
2 x 1,260 HP  2 x 940 kW 
Controller/Monitoring    Quantum 
Electrical System   
System    24 V 
Batteries (series/parallel) (diesel version)    2 x 6 x 12 V 
Alternator    2 x 100 A 
Standard working lights    8 Xenon Lights 
Standard service lights    14 lights 
Hydraulic System   
The power train consists of two main drives. Diesel engines or electric motors can be supplied. Each connected to a gearbox and 3 identical main pumps which draw hydraulic oil from an unpressurized hydraulic tank. Open circuit hydraulics provide maximum cooling and filtering efficiency.

The four-circuit system features a load-limiting governor with oil delivery summation to the working circuits and incorporates pressure cut-off control. Hydropilot prioritizes hydraulic flow giving smooth hydraulic response, simple hydraulic system layout, and a reduced number of components. Filtration is at the oil intake to pumps, valve blocks, heat exchangers and the oil tank. 
Rated flow (total output)  1110 gpm  4200 ltr/min 
Relief valve setting  4,495 psi  310 bar 
Swing flow rate  185 gpm  700 ltr/min 
High pressure in line filters
one per pump located at the valve blocks 
  200 microns 
Full flow return line filters (10 double elements)
(at head of hydraulic tank) 
  10 micron 
Case drain/by-pass return line filters    3 micron 
Drives and Brakes   
Travel control    2 foot pedals 
Gradeability    Up to 50% 
Travel speed (maximum)  1.4 mph  2.1 km/h 
Service brake    Hydraulic 
Parking brake    Wet, multiple-disc 
Cooling System   
The high capacity engine radiators are cooled by hydraulically driven fans for superior cooling efficiency and require little maintenance. The hydraulic system includes four large swing-out vertical air-to-oil hydraulic coolers with temperature-regulated hydraulically driven fans. 
Swing System   
Hydraulic motors and drives   
Swing brake, service    Hydraulic 
Swing brake, parking    Wet, multiple-disc 
Swing ring teeth    External 
Swing speed (maximum)    3.1 rpm 
Electric Drive   
Type    2x Squirrel-cage induction motor 
Power output    2 x 900 kW 
Voltage    6600 V* 
Amperage (approximate)    215 A 
Start-up    Soft start each motor in succession 
Frequency (standard)    50 Hz @ 1500 rpm 
Optional frequency    60 Hz @ 1800 rpm 
*Other voltages available on request.     
Undercarriage   
Undercarriage consists of one center carbody and two track frames, each side attached by 80 high torque bolts. 
Center frame    H-type 
Track frame    Steel box-section 
Track adjustment    Automatic hydraulic type 
Number of shoes    46 each side 
Number of top rollers    3 each side 
Number of bottom rollers    7 each side 
Automatic Centralized Lubrication   
Two hydraulically powered Lincoln single line automatic lubrication systems are provided as standard, complete with time and volume variable controls. Activity and malfunction events are linked to the ECS.

The central lube grease system is supplied from a refillable 300 liter / 80 gal. container. A second, identical system supplies open gear lubricant to the swing ring teeth through a lube pinion. Replenishment of the containers is through the service center. 
Service Refill Capacities   
Hydraulic oil tank  1,000 U.S. gal  3800 ltr 
Hydraulic system  1,585 U.S. gal  6000 ltr 
Fuel  2,853 U.S. gal  10800 ltr 
Engine coolant  2x 95 U.S. gal  2x 360 ltr 
Engine oil  2x 50 U.S. gal  2x 190 ltr 
Centinel engine oil make up tank  2x 153 U.S. gal  2x 580 ltr 
Vehicle Monitoring System   
The Electronic Control System (ECS) digital diagnostic system, mounted in the operator’s console, provides a text display of realtime and stored information about the operating systems of the machine. Non-serious and critical faults are immediately announced, and for major malfunctions the engines are also shut down. The integrated digital storage provides full event history, which can be downloaded with a laptop computer. The ability to electronically record service events provides precise service information to assist in reducing downtime. 
Cab   
The large welded steel cab is mounted with 18 viscous damping pads and sound insulated.

It is equipped with automatic climate control and is pressurized. The operator’s seat is fully adjustable, air suspended, electrically heated and has a lap seat belt. Trainer’s seat included.

Low effort joystick controls are electric over hydraulic and foot controls are for front shovel clam, crawler and swing brake.

Full instrumentation and Electronic Control System (ECS) are provided. Space in the console is provided for an additional monitor. AM/FM radio is included. The dual windshield wipers have two-speed and intermittent operation (water reservoir 7 liters 1.8 gal.). Amenities include a wash basin with running water (water reservoir 50 liters 13 gal.), refrigerator, and storage cabinets. Powered mirrors are adjustable from inside the cab. 
There are left and right-hand sliding windows. All windows are tinted parsol green. External metal louvers are provided on the cab side windows.     
Cab engineering standards are:     
• ISO 3449 Falling Objects Protection Structure (FOPS) Level 2     
• ISO 6396 Noise in operator´s cab is 76dB(A)     
• Air conditioner  34,120 Btu/hr  10 kW 
• Heater/Defroster (Diesel version)  34,120 Btu/hr  10 kW 
• Heater/Defroster (Electric version)  40,940 Btu/hr  12 kW 

< Page 1 2 >