PC130-8

> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?

  Print Brochure (2,042 Kb)

Click for Larger Image

< Page 1 2 >  
Engine   
Model    Komatsu SAA4D95LE-5 
Type    Water cooled, 4-cycle, direct injection 
Aspiration    Turbocharged, and air-to-air aftercooled 
Number of cylinders   
Bore  3.74"  95 mm 
Stroke  4.53"  115 mm 
Piston displacement  199 in  3.26 ltr 
Horsepower:     
Gross (SAE J1995) @ 2200 rpm  97 HP  72 kW 
Net (ISO 9249/SAE J1349) @ 2200 rpm  92 HP  68 kW 
Governor    All speed control, electronic 
Lubrication system:     
Method    Gear pump, force-lubrication 
Filter    Full-flow 
Air cleaner    Dry type with double elements and auto dust evacuator, plus dust indicator 
EPA Tier 3 and EU Stage 3A emissions certified.     
Hydraulic System   
Type    HydrauMind (Hydraulic Mechanical Intelligence New Design) system, Closed-center system with load-sensing valves and pressure-compensated valves 
Number of selectable working modes   
Main pump:     
Type    Variable displacement piston type 
Pumps for    Boom, arm, bucket, swing, and travel circuits 
Maximum flow  64 U.S. gal/min  242 ltr/min 
Supply for control circuit    Self-reducing valve 
Hydraulic motors:     
Travel    2 x axial piston motor with parking brake 
Swing    1 x axial piston motor with swing holding brake 
Relief valve setting:     
Implement circuits  4,620 psi  31.9 MPa / 325 kgf/cm 
Travel circuit  5,050 psi  34.8 MPa / 355 kgf/cm2 
Swing circuits  3,580 psi  24.7 MPa / 252 kgf/cm 
Pilot circuit  470 psi  3.2 MPa / 33 kgf/cm 
Hydraulic cylinders / Number of cylinders:  bore x stroke x rod diameter  bore x stroke x rod diameter 
Boom / 2  4.1" x 39.2" x 2.8"  105 mm x 995 mm x 70 mm 
Arm / 1  4.5" x 46.3" x 3.0"  115 mm x 1175 mm x 75 mm 
Bucket / 1  3.7" x 34.8" x 2.6"  95 mm x 885 mm x 65 mm 
Swing System   
Drive method    Hydraulic 
Swing reduction    Planetary gear 
Swing circle lubrication    Grease-bathed 
Service brake    Hydraulic lock 
Holding brake/Swing lock    Mechanical disc brake 
Swing speed    11.0 rpm 
Drives and Brakes   
Steering control    Two levers with pedals 
Drive method    Hydrostatic 
Maximum drawbar pull  27,570 lbf  12,500 kgf
123 kN 
Gradeability    70%, 35 
Maximum travel speed:     
High  3.4 mph  5.5 km/h 
Low  1.8 mph  2.9 km/h 
Service brake    Hydraulic lock 
Parking brake    Mechanical disc 
Undercarriage   
Center frame    X-leg frame 
Track frame    Box-section 
Track type    Sealed track 
Track adjuster    Hydraulic 
Number of shoes    43 each side 
Number of carrier rollers    1 each side 
Number of track rollers    7 each side 
Coolant and Lubricant Capacity (refilling)   
Fuel tank  65.3 U.S. gal  247 ltr 
Radiator  3.7 U.S. gal  13.9 ltr 
Engine  3.0 U.S. gal  11.5 ltr 
Final drive, each side  0.6 U.S. gal  2.1 ltr 
Swing drive  0.7 U.S. gal  2.5 ltr 
Hydraulic tank  23.8 U.S. gal  90 ltr 
Operating Weight (APROXIMATE)   
Operating weight including 4600 mm / 15'1" one-piece boom, 2500 mm / 8'2" arm, SAE heaped 0.5 m / 0.65 yd backhoe bucket, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment. 
Shoes  24"  600 mm 
Operating Weight  27,700 lb  12560 kg 
Ground Pressure  0.33 kg/cm
32.6 kPa 
4.73 psi 

< Page 1 2 >