WA700-3 With AJSS

> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?

  Print Brochure (2,084 Kb)

Click for Larger Image

< Page 1 2 >  
Charts


Dimensions



All specs are with teeth and 41.25/75-39, 34PR (L5) tires, steel cab, ROPS canopy, lubricant, full fuel, optional counterweight, and operator.

Tread 9'11'' 3030 mm
Width over tires 13'5'' 4080 mm
A. Wheelbase 15'9'' 4800 mm
B. Hinge pin height, at maximum height: Standard Boom 19'9'' 6030 mm
B. Hinge pin height, at maximum height: High Lift Boom 21'7" 6590 mm
C. Hinge pin height, at carry position: Standard Boom 2'6'' 760 mm
C. Hinge pin height, at carry position: High Lift Boom 3'1" 950 mm
D. Ground clearance 1'11" 580 mm
E. Hitch height 5'2'' 1570 mm
F. Overall height, top of stack 16'0'' 4865 mm
G. Overall height, ROPS canopy 15'10" 4830 mm
Bucket Straight Edge Rock With Teeth Spade Nose Rock With Teeth Spade Nose Rock With Teeth (HL)
Bucket capacity (SAE rated) 11.4 yd
8.7 m
11.4 yd
8.7 m
10.5 yd
8.0 m
Bucket capacity (Struck) 9.9 yd
7.6 m
9.9 yd
7.6 m
9.2 yd
7.0 m
Bucket width 15'0''
4570 mm
15'0''
4570 mm
15'0"
4570 mm
Bucket weight 14,925 lb
6770 kg
15,760 lb
7150 kg
15,080 lb
6830 kg
Static tipping loads (Straight) 103,240 lb
46830 kg
102,600 lb
46480 kg
93,440 lb
42330 kg
Static tipping loads (Full turn, 40) 90,610 lb
41100 kg
90,000 lb
40770 kg
81,170 lb
36770 kg
Dump clearance, maximum height and 45 dump angle 14'2''
4320 mm
13'5''
4080 mm
15'4"
4685 mm
Reach at 7' / 2130 mm and 45 dump angle 9'10''
2995 mm
10'7''
3210 mm
11'7"
3530 mm
Reach at maximum height and 45-degree dump angle 6'2''
1890 mm
7'0''
2135 mm
6'11"
2120 mm
Operating height (Fully raised) 26'11''
8210 mm
26'11''
8210 mm
28'5"
8665 mm
Overall length (Bucket ground) 39'10''
12140 mm
40'11''
12480 mm
43'7"
13295 mm
Turning radius* 31'7''
9620 mm
31'6''
9615 mm
32'3"
9840 mm
Digging depth (0) 5''
130 mm
5''
130 mm
6'0"
145 mm
Digging depth (10) 1'7''
470 mm
1'8''
520 mm
1'9"
530 mm
Breakout force (Bucket cylinder) 142,640 lb
64700 kg
116,180 lb
52700 kg
123,180 lb
55800 kg
Operating weight 156,570 lb
71020 kg
157,410 lb
71400 kg
161,150 lb
73000 kg

*Turning radius measured with bucket at carry position, outside corner of bucket with teeth. NOTES: (1) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers. SAE standard J732c JUN 92 and J742 FEB 85.(2) Static tipping load and operating weight shown include 41.25/75-39, 34PR (L5) tires, enclosed cab, ROPS canopy, lubricant, full fuel tank, optional counterweight, and operator. (3) Machine's stability and operating weight are affected by counterweight, tire size, and other weight changes to operating weights and static tipping load.


Weight Changes

- Change in Operating Weight Change in Operating Weight Change in Operating Weight Change in Static Tipping Load Straight Change in Static Tipping Load Straight Change in Static Tipping Load Straight Change in Static Tipping Load Full Turn (40) Change in Static Tipping Load Full Turn (40) Change in Static Tipping Load Full Turn (40)
Tires/Buckets S/E with teeth S/N with teeth S/N with teeth (HL) S/E with teeth S/N with teeth S/N with teeth (HL) S/E With Teeth S/N With Teeth S/N With Teeth (HL)
45/65 R39 (L5) 157,630 lb
71500 kg
158,470 lb
71880 kg
161,995 lb
73480 kg
103,970 lb
47160 kg
103,198 lb
46810 kg
94,049 lb
42660 kg
91,271 lb
41400 kg
90,543 lb
41070 kg
81,725 lb
37070 kg

All dimensions, weights, and performance values based on SAE J732c and J742b standards.


Bucket Selection Guide



This guide, representing bucket sizes not necessarily manufactured by Komatsu, will help you select the proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. Bucket fill factors represent the approximate amount of material as a percent of rated bucket capacity. Fill factors are primarily affected by material, ground conditions, breakout force, bucket profile, and the cutting edge of the bucket used.

Material (loose weight) lb/yd
kg/m
Clay and gravel, dry 2,400
1420
Clay and gravel, wet 2,600
1540
Coal, anthracite, broken 1,850
1100
Coal, bituminous, broken* 1,400
830
Earth, dry, packed 2,550
1510
Earth, loam 2,100
1250
Earth, wet, excavated 2,700
1600
Granite, broken or large crushed 2,800
1660
Gravel, dry 2,550
1510
Gravel, dry 1/2" to 2" 13 to 50 mm 2,850
1690
Gravel, pit run (graveled sand) 3,250
1930
Gravel, wet 1/2" to 2" 13 to 50 mm 3,400
2020
Limestone, broken or crushed 2,600
1540
Phosphate rock 2,160
1280
Sand and gravel, dry 2,900
1720
Sand and gravel, wet 3,400
2020
Sand, dry 2,400
1420
Sand, wet 3,100
1840
Stone, crushed 2,700
1600
Topsoil 1,600
950

*Use 12.3 yd / 9.4 m bucket furnished by outside vendor. Contact Komatsu Sales Engineering.


< Page 1 2 >