> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?


< Page 1 2 >  
Charts


Dimensions



Tread 6'4" 1930 mm
Width over tires 8'1" 2470 mm
A. Wheelbase 9'4" 2840 mm
B. Hinge pin height at max. height 12'2" 3705 mm
C. Hinge pin height at carry position 1'3" 380 mm
D. Ground clearance 1'8" 495 mm
E. Hitch height 3'1" 940 mm
F. Overall height, top of stack 9'2" 2785 mm
G. Overall height ROPS cab 10'5" 3180 mm
H. See Dumping Clearance Below - -

Measured with 20.5-25-12PR (L2) tires


Dimensions

Bucket Stockpile Bucket With Bolt-On Cutting Edge Stockpile Bucket With Bolt-On Cutting Edge Excavating Bucket With Bolt-On Cutting Edge Excavating Bucket With Bolt-On Cutting Edge Light Material Bucket With Bolt-On Cutting Edge Light Material Bucket With Bolt-On Cutting Edge
Bucket capacity            
Heaped 2.6 yd³ 2.0 m³ 2.2 yd³ 1.7 m³ 3.1 yd³ 2.4 m³
Struck 2.2 yd³ 1.7 m³ 1.8 yd³ 1.4 m³ 2.6 yd³ 2.0 m³
Bucket width 8'4" 2550 mm 8'4" 2550 mm 8' 4" 2550 mm
Bucket weight 1,731 lb 785 kg 1,631 lb 740 kg 1,929 lb 875 kg
Static tipping load:            
Straight 20,481 lb 9290 kg 20,614 lb 9350 kg 20,150 lb 9140 kg
40° full turn 17,813 lb 8080 kg 17,945 lb 8140 kg 17,537 lb 7955 kg
Dumping clearance, maximum height and 45° dump angle (H) 9'3" 2830 mm 9'6" 2885 mm 8'11" 2725 mm
Reach at 7' / 2130 mm 45° dump angle 4'7" 1405 mm 4'6" 1380 mm 4'9" 1455 mm
Reach at maximum height and 45° dump angle 3'0" 925 mm 2'10" 870 mm 3'5" 1030 mm
Reach with arm horizontal and bucket level 7'0" 2140 mm 6'9" 2060 mm 7'6" 2290 mm
Operating height
fully raised
16'3" 4955 mm 15'10" 4835 mm 16'7" 5065 mm
Overall length
Bucket on Ground
22'7" 6895 mm 22'5" 6825 mm 23'2" 7060 mm
Turning radius 18'6" 5650 mm 18'5" 5620 mm 18'9" 5715 mm
Digging depth:            
2.5" 65 mm 2.5" 65 mm 2.5" 65 mm
10° 9.8" 250 mm 9.2" 235 mm 10.8" 275 mm
Breakout force 20,944 lb 12340 kg 23,038 lb 10450 kg 18,298 lb 8300 kg
Operating weight 22,685 lb 9920 kg 22,586 lb 10245 kg 22,872 lb 10375 kg

* Bucket at carry, outside corner of bucket. At the end of tooth or B.O.C.
All dimensions, weights, and performance values based on SAE J732c and J742b standards. Static tipping load and operating weight shown include lubricant, coolant, full fuel tank, ROPS cab, additional counterweight, air conditioning and operator. Machine stability and operating weight affected by counterweight, tire size, and other attachments.



Weight Changes

- Change in Operating Weight Change in Operating Weight Change in Tipping Load
Straight
Change in Tipping Load
Full Turn
Width Over Tire Width Over Tire Ground Clearance Ground Clearance Change in Vertical Dimensions Change in Vertical Dimensions
17.5/25-12PR (L2) -992 lb -450 kg -529 lb
-240 kg
-485 lb
-220 kg
7'10" 2375 mm 1'5" 425 mm -2.8" -70 mm
17.5/25-12PR (L3) -761 lb -345 kg -353 lb
-160 kg
-331 lb
-150 kg
7'10" 2375 mm 1'5" 425 mm -2.8" -70 mm
20.5/25-12PR (L2) 0 lb 0 kg 0 lb
0 kg
0 lb
0 kg
8'1" 2470 mm 1'8" 495 mm 0" 0 mm
20.5/25-12PR (L3) +474 lb +215 kg +254 lb
+115 kg
+220 lb
+100 kg
8'1" 2470 mm 1'8" 495 mm 0" 0 mm
Install ROPS canopy (instead of cab) –551 lb –250 kg –551 lb
–250 kg
–485 lb
–220 kg
N/A N/A N/A N/A N/A N/A
Remove additional counterweight –661 lb –300 kg –1,300 lb
–590 kg
–1,124 lb
–510 kg
N/A N/A N/A N/A N/A N/A
Remove air conditioner –154 lb –70 kg –132 lb
–60 kg
–110 lb
–50 kg
N/A N/A N/A N/A N/A N/A


Bucket Selection Guide





< Page 1 2 >