> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?

  Print Brochure (4,164 Kb)

Click for Larger Image

< Page 1 2 >  
Model    Komatsu SAA4D95LE-6* 
Type    4-cycle, water-cooled, direct injection 
Aspiration    Variable flow turbocharged, air-to-air aftercooled 
Number of cylinders   
Bore x stroke  3.75" x 4.52"  95 mm x 115 mm 
Piston displacement  199 in³  3.26 ltr 
Governor    All-speed, electronic 
SAE J1995 - Gross  107 HP  79 kW 
ISO 9249 / SAE J1349 - Net  105 HP  78 kW 
Rated rpm    2200 rpm 
Fan drive type    Hydraulic (reversible) 
Lubrication system:     
Method    Gear pump, force lubrication 
Filter    Full-flow 
*EPA Tier 4 Interim and EU stage 3B emissions certified     
Hydrostatic Transmission   
Dual-path, hydrostatic transmission provides infinite speed changes up to 8.5 km/h / 5.3 mph. The variable capacity travel motors allow the operator to select the optimum speed to match specific jobs. Travel control lock lever and neutral switch. 
Travel speed
(quick shift mode)* 
Forward  Reverse 
1st  0–2.1 mph
0–3.4 km/h 
0–2.5 mph
0–4.1 km/h 
2nd  0–3.5 mph
0–5.6 km/h 
0–4.0 mph
0–6.5 km/h 
3rd  0–5.3 mph
0–8.5 km/h 
0–5.3 mph
0–8.5 km/h 
Travel speed
(variable mode) 
Forward  Reverse 
  0–5.3 mph
0–8.5 km/h 
0–5.3 mph
0–8.5 km/h 
*Quick shift speeds are adjustable in the monitor.     
Final Drive   
In-shoe mounted axial piston type travel motors with integrated twostage planetary gear reduction. Compact in-shoe mount reduces risk of damaged by debris. Bolt-on sprocket ring. 
Steering System   
Palm Command Control System (PCCS) joystick control for all directional movements. Pushing the joystick forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the joystick to the left or right to make a turn. Tilting the joystick fully to the left or right activates counter-rotation.

Hydrostatic Transmission (HST) provides smooth powerful turns. Fully electronic control enables smooth control that can be adjusted in the monitor. The PCCS utilizes shift buttons to increase and decrease speed. 
Minimum turning radius:  87"  2.2 m 
As measured by track marks on the ground at pivot turn.     
Suspension    Rigid type 
Track roller frame    Monocoque, large section, durable construction 
Rollers and idlers    Lubricated track rollers 
Sealed and lubricated track    Track tension is easily adjusted with grease gun. 
Number of track rollers (each side)   
Type of shoes (standard)    Single grouser 
Number of shoes (each side)    39 
Grouser height  2.1"  53 mm 
Shoe width (standard)  25"  635 mm 
Ground contact area  4,616 in²  29782 cm² 
Ground pressure
(with dozer, ROPS cab) 
4.70 psi  0.33 kgf/cm² / 31.7 kPa 
Track gauge  5'11"  1810 
Length of track on ground  7'8"  2345 mm 
Service Refill Capacities   
Coolant  9.0 U.S. gal  34 ltr 
Fuel tank  50.2 U.S. gal  190 ltr 
Engine oil  2.9 U.S. gal  11 ltr 
Hydraulic tank  15.8 U.S. gal  60 ltr 
Final drive (each side)  0.9 U.S. gal  3.5 ltr 
Operating Weight (APROXIMATE)   
Tractor weight:    Including ROPS cab, U frame for power angle tilt dozer, rated capacity of lubricant, coolant, full fuel tank, operator, and standard equipment. 
ROPS cab  18,982 lb  8610 kg 
Operating weight:    Including Power Angle Tilt dozer, ROPS cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank. 
ROPS cab  21,675 lb  9830 kg 
Hydraulic System   
Closed-center Load Sensing System (CLSS) designed for precise and responsive control, and for efficient simultaneous operation.     
Hydraulic control unit:     
All spool control valves externally mounted remote to the hydraulic tank. Piston-type hydraulic pump with capacity (discharge flow) of 99 ltr/min 26 U.S. gal/min at rated engine rpm.     
Relief valve setting  3,974 psi  27.4 MPa / 280 kg/cm² 
Hydraulic cylinders    Double-acting, piston type 
Number of cylinders:  Bore  Bore 
Blade lift / 2  3"  75 mm 
Blade tilt / 1  3.6"  90 mm 
Blade angle / 2  3.1"  80 mm 
Blade pitch    1 adjustable linkage 
Hydraulic oil capacity (refill):     
Power angle tilt dozer  15.9 U.S. gal  60 ltr 
Control valves:     
3-spool control valve for Power Angle Tilt dozer     
Blade lift    Raise, hold, lower, and float 
Blade tilt    Right, hold, and left 
Blade angle    Right, hold, and left 
Additional control valve required for ripper     
Ripper lift    Raise, hold and lower 

< Page 1 2 >