PC1250-8

> Specifications  > Features  > Charts  > Standard Equipment

> Optional Equipment   > Need a Quote?

  Print Brochure (3,812 Kb)

Click for Larger Image

Standard Equipment

ENGINE AND RELATED ITEMS:
Air cleaner, double element, dry type
Auto decelerator
Electric fuel priming pump
Engine, Komatsu SAA6D170E-5
Fuel pre-filters (10 micron) with water separator
Fuel primary filter (2 micron)
Variable speed cooling fan, hydraulic drive, reversible
ELECTRICAL SYSTEM:
Alternator, 90 amp, 24 V
Batteries, 220 Ah, 2 x 12 V
Interconnected horn and flashing light
Power supply, 12V
Starting motors, 11kW x 2
Step light with timer
Working lights-2 boom, 2 cab top front, 1 cab bottom
UNDERCARRIAGE:
700 mm 28'' double grouser (PC1250-8)
1000 mm 39.4'' double grouser (PC1250LC-8)
8 track/3 carrier rollers (each side)(PC1250-8)
10 track/3 carrier rollers (each side)(PC1250LC-8)
Hydraulic track adjusters (each side)
Track guiding guard (each side)
GUARDS AND COVERS:
Engine thermal guards and fan guard
Dust-proof net for radiator and oil cooler
Pump/engine room partition wall
Travel motor guards
Revolving frame under cover (Heavy-duty)
Track frame undercover (center)
OPERATOR ENVIRONMENT:
Damper mount, all-weather, pressurized, sound- suppressed cab with tinted safety glass windows, lockable door, intermittent window wiper and washer, floormat, cigarette lighter and ashtray
Instrument panel with electronic display/monitor system, electronically-controlled throttle dial, electric service meter, gauges (coolant temperature, hydraulic temperature and fuel level), caution lights (electric charge, engine oil pressure, and air cleaner clogging), indicator lights (engine preheating and swing lock light) level check lights (coolant, engine oil, and hydraulic oil level), self-diagnostic system with trouble data memory
Automatic air conditioner/heater/defroster system
FOPS
Pull-up type front window, lockable
Radio, AM-FM
Rearview mirrors, left and right
Seat, fully adjustable with suspension
Seat belt 78 mm 3" non-cinching
HYDRAULIC CONTROLS:
Fully hydraulic, with Electronic Open-Center Load- Sensing (EOLSS) and engine speed sensing (pump and engine mutual control system)
One gear pump for control circuit
Two axial piston motors for swing with single-stage relief valve
One axial piston motor per track for travel with counter balance valve
Three variable capacity piston pumps (2 Main, 1 Swing)
Three control valves, 5+4+4 spools (boom, arm, bucket, swing, and travel)
Control levers, wrist control levers for arm, boom, bucket, and swing with PPc system
Control levers and pedals for steering and travel with PPC system
Oil cooler, hydraulic
In-line high pressure hydraulic filters
Shockless boom control
Swing priority mode
Two-mode setting for boom
Working modes: Power, Economy (four level), Heavy Lift
DRIVE AND BRAKE SYSTEM:
Brakes, hydraulic lock travel brakes, oil disc parking
Hydrostatic two travel speed system with planetary double reduction final drive
OTHER STANDARD EQUIPMENT:
Automatic swing holding brake
Corrosion resister
Counterweight, 18000 kg 39,680 lb
Grease gun, air pump type
Horn, air
Large handrails and steps
Lift capacity chart
Marks and plates, English
One-touch engine oil drainage
Paint, Komatsu standard
PM tune-up service connector
Slip resistant plates
Travel alarm
Vehicle Health Monitoring System (VHMS) with ORBCOMM
Wide catwalk